D-D Dual Heating & cooling controller

D-D Dual Heating & Cooling Controller

The Dual Digital Temperature Controller is designed to allow precise control of the temperature in an aquarium and has 2 modes which allow control of both heating and cooling at the same time.

Double mains power socket – one power socket for heater control and the other for fan/chiller control.
Display with temperature sensor – used to set and display temperature and alarms and measure temperature.
The plastic coated temperature sensor is waterproof and suitable for use in a marine aquarium.

Features

• Plug and play - no wiring required
• Heating/cooling can be set to within 0.3 deg C of target temperature e.g. Control Range of 24.7 - 25.3 deg C (with set temp of 25 deg C)
• Audible and Visual Alarm Function e.g alarm sounds if temp below 24 deg C or above 26 deg C (with alarm set to 1 deg C)
• 2m long plastic coated temperature sensor with mounting suction cup
• Heating Control (resistive load, such as heater) max 1600W
• Cooling Control (inductive load, such as a chiller) max 600W
• Display: Back lit blue LCD – permanently lit
• Power off memory function
• Makes an ideal control platform for our Schego Titanium aquarium heater

Specifications

Size:

• Display panel size: 95mm x 50mm x 15mm
• Control socket size: 160mm x 70mm x 45mm 

Technical Parameters:

• Temperature measuring range: -40 - 99 deg C
• Temperature differential setting range 0.3 – 16.0 deg C
• Alarm function range: 0.5 – 5 deg C of set point temperature
• Resolution: 0.1 deg C
• Accuracy: ±1 deg C (-30 - 50 deg C)
• Power supply: 220VAC±10%, 50/60Hz         
• Operating Humidity range: 20%  - 85%
• Power consumption: ≤3W
• Operating Temperature Range: - 10 – 60 deg C   
• Product Code TC125